Exciting News!

Whoop whoop! I'm this week's Cut Out and Keep Knit and Crochet Superstar. Every day this week a pattern will be released on Cut Out and Keep. You can read the interview and see the links to the patterns here. 

First pattern up, my Lomond Hat:

Lomond Hat

A cute hat that'll keep your ears warm. Knits up quickly in cosy chunky yarn.

Yarn: Quince and Co. Puffin, one skein = 112 yards/102 metres

Needles: One 6.5mm/US 10½ 100cm/40” circular needle, plus four 6.5mm/US 10½ double pointed needles if not using magic loop method.

Gauge: 12 stitches = 4” in stocking stitch using 6.5mm/US 10½ needles.

Dimensions: To fit an average ladies head (about 22” around).

Notation:

k = knit

p = purl

k2tog = knit next two stitches together

w&t = wrap and turn.

dc = double crochet (please note that in the USA this is called single crochet!)

Techniques

Wrap and Turn

On the right side:

Bring yarn to the front, slip next stitch (this is the “wrapped stitch”) onto right hand needle, bring yarn to the back, slip wrapped stitch back onto left hand needle, turn your work.

On the wrong side:

Bring yarn to the back, slip next stitch (this is the “wrapped stitch”) onto right hand needle, bring yarn to the front, slip wrapped stitch back onto left hand needle, turn your work.

See youtube video here.

To work a wrapped stitch together with its wrap:

When you get to the wrapped stitch, lift the wrap (the bit of yarn wrapping round the wrapped stitch) onto the end of the left hand needle and knit/purl this together with the wrapped stitch.

Youtube video here.

Stitch Patterns

Double Moss Stitch:

Row 1: *k1 p1* to end of row.

Row 2: *k1 p1* to end of row.

Row 3: *p1 k1* to end of row.

Row 4: *p1 k1* to end of row.

Stockinette Stitch in the round:

Knit every round.

Directions:

Moss Stitch Band

Cast on 56 stitches, do not join in the round. Work in Double Moss Stitch for 3”. Either join in the round and place marker for beginning of round working using magic loop method, or transfer to four double pointed needles for working in the round.

Short Row Shaping

You should have 56 stitches joined in the round. Place four more markers (we'll call them M1, M2, M3 and M4) as follows:

Place M1 after stitch 17, M2 after stitch 21, M3 after stitch 35 and M4 after stitch 39. Knit to one stitch before M4, w&t. Purl to one stitch before M1, w&t. Knit to one stitch before M3, w&t. Purl to one stitch before M2, w&t.

Crown

Work in stockinette stitch in the round. In the first round after the short row shaping, work wraps together with wrapped stitches. You can remove M1, M2, M3 and M4 after you've done this. Continue working in stockinette until the stockinette section measures 3”, measuring at the beginning of the round. Now decrease as follows:

Decrease round 1: *k6 k2tog* to end of round.

Decrease round 2: knit.

Decrease round 3: *k5 k2tog* to end of round.

Decrease round 4: knit.

Decrease round 5 *k4 k2tog* to end of round.

Decrease round 6: knit.

Decrease round 7: *k3 k2tog* to end of round.

Decrease round 8: *k2 k2tog* to end of round.

Decrease round 9: *k1 k2tog* to end of round.

Decrease round 10: *k2tog* to end of round.

You should have 7 stitches left. Cut the yarn, leaving a 6” tail. Thread the long tail onto a needle, and slip the 7 remaining stitches onto the thread. Pull tight and sew over the little hole at the top a few times.

Finishing

Starting from where you joined in the round, dc right round the bottom edge of the hat. Make up a 3” pompom and sew to the top of the hat. Weave in any loose ends and you're done!

Copyright Littletheorem

Cladach Hat

A cute, quick knit hat in an easy to memorise lace pattern.

Yarn: Rowan Lima, 1 skein = 109 yards/100 metres

Needles: Set of four 5mm / US 8 double pointed needles (dpns), or one 5mm/US 8 circular needle for magic loop.

Gauge: 22 stitches and 28 rows =

4” in stocking stitch using 5mm needles,

ball-band gauge: 20sts = 4” in stocking stitch with 5.5mm needles.

Dimensions: To fit an average ladies head (about 22” around).

Notation:

CO = cast on

k = knit

kb= knit into back of next stitch

p = purl

yo = bring yarn forward

k2 tog = knit next two stitches together

sk2p = slip 1, k2tog, pass slipped stitch over.

Stitch Patterns

Twisted Rib

Round 1: *kb1 p1* to end of row.

Repeat Round 1 for pattern.

Cladach Lace Chart

Knit rows 2, 4, 6 and 8.

Cladach Lace Written Pattern:

Round 1: *p2 yo k3 sk2p k3 yo* to end.

Round 2: knit

Round 3: *p2 k1 yo k2 sk2p k2 yo k1* to end.

Round 4: knit

Round 5: *p2 k2 yo k1 sk2p k1 yo k2* to end.

Round 6: knit

Round 7: *p2 k3 yo sk2p yo k3* to end.

Round 8: knit.

Directions:

CO 72 stitches over three dpns (27 stitches on first needle, 27 on second, 18 on third) or on circular needle for magic loop method. Join stitches in the round ensuring they're not twisted and if using circular needle, place marker for beginning of row.

Work in Twisted Rib Pattern for 10 rounds, then work set up round as follows.

Set up round: *p2 yo k7 yo* until end of round. You should now have 88 stitches.

Work in Cladach Lace Pattern, starting on Round 2. Work to the end of the chart/written instructions, then work chart/written instructions three more times in full.

Work in stocking stitch (i.e. knit every round) for four rounds, then decrease as follows:

Decrease round 1: *k9 k2tog* to end of round.

Decrease round 2: knit.

Decrease round 3: *k8 k2tog* to end of round.

Decrease round 4: knit.

Decrease round 5 *k7 k2tog* to end of round.

Decrease round 6: knit.

Decrease round 7: *k6 k2tog* to end of round.

Decrease round 8: knit.

Decrease round 9: *k5 k2tog* to end of round.

Decrease round 10: *k4 k2tog* to end of round.

Decrease round 11: *k3 k2tog* to end of round.

Decrease round 12: *k2 k2tog* to end of round.

Decrease round 13: *k1 k2tog* to end of round.

Decrease round 14: *k2tog* to end of round.

You should have 8 stitches left. Cut the yarn, leaving a 6” tail. Thread the long tail onto a needle, and slip the 8 remaining stitches onto the thread. Pull tight and sew over the little hole at the top a few times. Weave in the loose ends on the wrong side and you're done!

Copyright Littletheorem

Updates

Just a quick post to keep everyone up to date with the latest news. First, I've just made a Facebook page, which you can find here. Keep an eye on it for latest pattern and yarn news and hopefully a few giveaways will be coming up in the near future.

I've got a new shawl pattern just out: Buddleia is based on a traditional Estonian leaf lace pattern witht the addition of a floral motif. You can buy the pattern on Ravelry and in my Etsy shop.

  Next, I've got a jumper pattern in the pipeline, Lochan is a beautiful lacy sweater with a really simple construction. All the shaping's done by changing needles and the lace pattern's easy to remember. It's still being tested at the moment, in fact, if you're interested in testing the sweater in a 32, 48 or 56" bust then you should head to the Ravelry free pattern testers group and volunteer! The pattern should hopefully be available to purchase at the end of November.

And finally, fresh off the blocking board is my Eilean shawl. I'm hopefully going to get the pattern written up this week and should be looking for test knitters soon. Keep an eye on the Ravelry free pattern testers group if you're interested!

Here's a wee picture!

Handspun Star Hat

 Unisex hat in a simple cable pattern shows off the beautiful colours in handspun yarn. This was the first time I had bought handpainted fibre to spin, and watching the colours change as I knitted this up was fascinating. The decreases at the top make a star shape and I added a few tiny star-shaped buttons as a cute detail. The buttons could be omitted (and perhaps more sober yarn used) for a manly version. I also include instructions to avoid the “scalloped” look at the edge. The hat is very stretchy, and will fit more or less any head. While the yarn in the picture is my own handspun yarn, I have suggested several commercially available alternatives.

Yarn: Handspun yarn from handpainted fibre or for example: Malabrigo merino worsted, Cascade yarns sierra, Debbie Bliss Cashmerino Aran. You need 120m in total.

Needles: 5 mm/US 8 dpns

Gauge: 18 stitches = 4” in stocking stitch.

Size: Stretches to fit most heads.

Extras: One 5mm / US 8 cable needle, and some buttons and embroidery thread if desired.

Notation:

CO = cast on

k = knit

p = purl

dpn = double pointed needle.

pm = place marker

slm = slip marker

ssk = slip two stitches knitwise, then knit them together with left hand needle.

K2tog = knit two stitches together

C6F = slip 3 stitches onto cable needle and hold to the front of your work, knit the next 3 stitches from left-hand needle, then the three stitches from the cable needle.

Cable Pattern

Round 1: *k6 p2* to end of round.

Round 2: As round 1.

Round 3: *C6F p2* to end of round.

Round 4: As round 1.

Directions

CO 120 stitches over 3 dpns and join in the round. Work in Cable Pattern until hat measures 6.5”. You might want to make it a little shorter/longer if you have a particularly small/large head. Also, if you want to avoid the scalloped look at the edge of the hat, work in k6 p2 rib for 4 rounds before starting the cable pattern. After 6.5”, ending on round 3, work decreases as follows:

Decrease set up row: k3 pm *k3 (p2 k6) twice p2 k3 pm* to last 21 stitches, k3 (p2 k6) twice p2.

It's easier to give instructions if the start of the round is the first marker, so k3 and we'll start rounds at the marker from now on .

Decrease round 1: *slm k2tog k1 (p2 k6) twice, p2 k1 ssk* to end of round (110 stitches).

Decrease round 2: *slm k2 (p2 k6) twice, p2 k2* to end of round.

Decrease round 3: *slm k2tog (p2 C6F) twice p2 ssk* to end of round (100 stitches).

Decrease round 4: *slm k1 (p2 k6) twice p2 k1* to end of round.

Decrease round 5: *slm k2tog p1 k6 p2 k6 p1 ssk* to end of round (90 stitches).

Decrease round 6: *slm k1 p1 k6 p2 k6 p1 k1* to end of round.

Decrease round 7: *slm k2tog C6F p2 C6F ssk* to end of round (80 stitches).

Decrease round 8: *slm k7 p2 k7* to end of round.

Decrease round 9: *slm k2tog k5 p2 k5 ssk* to end of round (70 stitches).

Decrease round 10: *slm k2tog k4 p2 k4 ssk* to end of round (60 stitches).

Decrease round 11: *slm k2tog k3 p2 k3 ssk* to end of round (50 stitches).

Decrease round 12: *slm k2tog k2 p2 k2 ssk* to end of round (40 stitches).

Decrease round 13: *slm k2tog k1 p2 k1 ssk* to end of round (30 stitches).

Decrease round 14: *slm k2tog p2 ssk* to end of round (20 stitches).

Decrease round 15: *slm k2tog ssk* to end of round (10 stitches).

Cut the yarn leaving a 10'' tail. Thread this through the remaining stitches and pull tight. Sew over the hole a couple of times and weave in any loose ends.

Beaded Rib Headband

Please note: this pattern is now available to download as a pdf from Craftsy for $2. It will still be freely available on this blog, but I thought people might want the opportunity to download a pdf version.

Unisex headband in an interesting textured rib pattern. The pictured headband was knitted with my handspun yarn, but I suggest a commercially available alternative. Instructions are given for two sizes: ladies' and men's. Instructions for smaller size are given first, followed by instructions for larger size in brackets. 

Yarn: Handspun Icelandic yarn OR Solitude Yarns Icelandic, 1 skein. Approx 75 (90) metres of yarn required.

Needles: 4 mm/US 6 dpns

Gauge: 22 stitches = 4” in stocking stitch.

Dimensions: Small: stretches to fit 22” head. Large: stretches to fit 24” head

Notation:

CO = cast on

k = knit

p = purl

dpn = double pointed needle.

 

Directions

Beaded Rib Pattern:

Round 1: *k3, p2* to end of round.

Round 2: *k1, p1, k1, p2* to end of round.

CO 100 (120) stitches over 3 dpns and join in the round.

Work in beaded rib pattern until headband measures 3.5 (4)”

Bind off all stitches and weave in any loose ends and you’re done!

 

Beaded Rib Mitts

Unisex mitts in an interesting textured rib pattern. Instructions are given for two sizes: ladies' and men's. Instructions for smaller size are given first, followed by instructions for larger size in brackets. These mittens are knitted in one piece, in the round. The pictured mittens were knitted with my handspun yarn, but I suggest a commercially available alternative.

Yarn: Solitude Yarns Icelandic, 2 skeins. Approx 150 (200) metres of yarn required per pair.

Needles: 4 mm/US 6 dpns

Gauge: 22 stitches = 4” in stocking stitch.

Dimensions: Ladies': 6” around, 10” long, Men's: 8” around 12” long.

Extras: Three stitch markers, a needle and some scrap yarn.

Notation:

CO = cast on

k = knit

p = purl

k1fb = knit one stitch into the front of the next stitch, and one stitch into the back (one stitch increased).

k1fbf = knit one stitch into the front of the next stitch, one stitch into the back, then one more stitch into the front (two stitches increased).

pm = place marker

sl m = slip marker

Pattern:

Beaded Rib Pattern:

Round 1: *k3 p2* to end of row.

Round 2: *k1 p1 k1 p2* to end of row.

Mitt Directions (make 2):

CO 40 (55) stitches over 3 dpns and join in the round. Work in Beaded Rib pattern until mitt measures 5½” (6½)”, ending on Round 1 of pattern.

Thumb Gusset:

Next row: k1 pm k1fbf pm k1 p2, work in Beaded Rib pattern to end of row (you should be on Round 2 of the pattern).

You will continue working as before, but increasing stitches between the two markers as follows:

Row 1: k1, slm, knit to next marker, slm, k1 p2, continue in Beaded Rib to the end of the round.

Row 2: k1, slm, k1fb, knit to one stitch before next marker, k1fb, slm, k1 p2, continue in Beaded Rib to the end of the round.

Repeat these two rows until you have 13 (17) stitches between the thumb gusset markers.

Thread a needle with about 6” of scrap yarn. Next row: k1; slip the stitches between the markers onto the scrap yarn and tie it in a loop to secure the stitches; k1fb, p2, continue working in Beaded Rib pattern to the end of the round (you should be on Round 1 of the pattern).

Now continue working Beaded Rib pattern until the mitt measures 10” (12”) from CO edge. Bind off all stitches.

Thumb: Pick up the 13 (17) thumb stitches on scrap yarn. Knit all stitches and join in the round. (Tip: On the first round, I like to work a k1fb on the last stitch in the round, slip this extra stitch onto the beginning of the first needle, and knit it together with the first stitch on the next round.) Work in stocking stitch (i.e. knit every stitch) until the thumb measures 3” (4”) from the base (or as long as you want it).

Next round: *k1p1* to last stitch, k1. Now bind off all stitches.

Weave in any loose ends and you’re done!